Essential Tips For Waterproofing Over Tiles

Sealing tiles is an important measure if you want to retain the appearance and strength of your tiled surface as long as possible, particularly in those parts of the house where humidity levels are high, such as bathrooms or kitchens. If you are handling a remodelling project or just looking to upgrade tiles, waterproofing over tiles can help to avoid expensive losses. Guidelines are outlined below to assist you in getting through the process:

1. Check the state of your Tiles
   The tiles beneath the waterproofing layer should be inspected before the start of the procedure or process. Look for any sort of gap, frayed tiles, or wet, mouldy appearance. If you see any chipped tiles while preparing to apply the waterproofing solution, it is advisable to replace or repair them. Appropriate preparation work will make certain that the given materials will be covered and protected properly and will last for a long period.
   
   
2. How to select the best Waterproofing Product
   Probably the most important aspect is choosing the correct waterproofing product for application over tiles. The possible forms for use are liquid membranes, sheets, and sealants. Liquid membranes are a favourite for their application benefits and flexibility, compared to sheet membranes, which have high mechanical strength. Ensure you use a product appropriate for the area you are remodelling, especially if it is for shower waterproofing.
   
   
3. Prepare the Surface
   Waterproofing over tiles, therefore, requires prior preparation. Initially, the surface should be cleaned to remove any fine particles and grease and any mould should be cleaned out. Clean surface deposits ensure better bonding or attachment of the waterproofing material. In particular, as for people using tiles that have a smooth and shiny surface, it is admissible to roughen those tiles slightly to increase tackiness.
   
   
4. Apply Primer
   The application of primer is usually advised when waterproofing over tiled areas. Primers are used in order to increase the adhesion of the waterproofing material to the surface of the tile. The primer should be applied on the walls with a brush or roller and there should be no touch till the primer forms a skin.
   
   
5. Apply Waterproofing Membrane
   After the application of the primer has dried you can now proceed with installation of the waterproofing membrane. Application should be made according to instructions of use by the manufacturer. Apply the entire contents of the membrane evenly using a brush or roller by applying the liquid over the tiles. Joints and corners should always be given the most consideration because they are usually the most vulnerable of the areas that are waterproofed. In such areas, for instance, the use of multiple coats may offer extra protection.
   
   
6. Allow for Proper Curing
   To all the waterproofing layers and cover them for sufficient time, let them cure and the layer cures adequately. This is a process or procedure that people fail to consider in the course of making their orders. As a reminder, curing times can also depend on the curing agent chosen, so always consult with the product label. The effectiveness of the membrane will be optimised if some steps are followed, specifically about the curing process.
   
   
7. Test for Leaks
   After curing it is advisable to carry out a test on your waterproofing job, especially in places such as shower areas. This you can do by pouring water into the shower base and looking for any sign of leakage. If there are previous leakages you may need to reprimer where the leakages were and subsequently apply the waterproofing layer.
   
   
   It is advisable to always keep in mind your project construction type and requirements, especially in areas that would require shower waterproofing. When you have internal and external tiled surfaces, some of the best tips highlighted above are highly recommendable and would help you protect your tiled surfaces to make them look as beautiful as they have been for many years.
   
   You may also like to read about - How To Maintain And Clean Different Types of Tiles